| ANnounce |
Send an announcement to local USERs. (AN
<Text Message>) |
| ANnounce/Full |
Send an announcement to all nodes and USERs.
(AN/F <Text Message>) |
| BYE |
Disconnect from the node. (BYE) or
(B) |
| DX |
Send a DX spot. (DX <Callsign>
<Frequency> or DX <Frequency>
<Callsign>) |
| DXTest |
Returns to USER only. (DXT P5NOW 14006.06)
Good for testing RES 1 & RES 2 |
| DIR |
Shows mail messages on the node |
| DIR/BULLETIN |
Shows mail messages to ALL, BULLETIN and anything
not to a call |
| DIR/NEW |
Shows only mail messages you haven't seen since
your last DIR |
| DIR/OWN |
Shows only mail messages to you including messages
to ALL & ones you sent |
| DIR/SUBJECT |
Shows mail messages with subject you enter.
(DIR/SUBJECT ARL) |
| DELete |
Delete mail messages. (DEL (Msg #) (DEL 1-99)
Deletes your messages from 1 to 99 |
| Kill |
Delete mail messages. (K (Msg #) (K 1-99)
Deletes your messages from 1 to 99 |
| List |
Shows mail messages on the node |
| List/NEW |
Shows only mail messages you haven't seen since
your last DIR or L |
| List/OWN |
Shows only mail messages to you including messages
to ALL & ones you sent |
| QUIT |
Disconnect from the node |
| READ |
Read cluster mail. (READ
<Message #>) See Mail Send/Receive
below |
| REply |
REply without a number following replies to the
last mail message you read. REply <#> replies
to the message with that number given. REply/DELete
replies to message and delets it. REply/DELete/RR
replies to message, delets message and gets a return receipt.
REply/RR replies to message and gets a return
receipt. |
| SEND |
(SEND <Callsign>) Sends mail to
that callsign. SEND <LOCAL> to just send a message to
local node USERs. SEND <ALL>, SEND
<FORSALE> and SEND <DXNEWS> will be passed to
all nodes for all USERs. |
| SET/ANN |
Turn on announcements |
| SET/BEACON |
Turn on beacon spots. These are spots ending
in "/B" or "BCN" |
| SET/BEEP |
Turn on a beep for DX and Announcement
spots |
| SET/BOB |
Turn on bottom of band DX spots |
| SET/DX |
Turn on DX spot announcements |
| SET/DXCQ |
Turn on CQ Zone in DX info for DX spots |
| SET/DXITU |
Turn on ITU Zone in DX info for DX spots |
| SET/DXS |
Turn on US state/province or country
in DX info
for DX spots |
| SET/USSTATE |
Turn
on US state or Canadian province spotter in DX info for DX
spots |
| SET/FILTER |
See Band & Mode Filtering
Below |
| SET/GRID |
Turns on DX Grid, toggles CQ Zone, ITU Zone, &
US State to off |
| SET/HOME |
Tell cluster your home node. (SET/HOME
<Node Call>) If you normally connect to K8SMC then it
would be (SET/HOME K8SMC) |
| SET/LOCATION |
Set your location (lat/lon) of your
station. (SET/LOCATION 42 17 N 84 21 W) |
| SET/LOGIN |
Tells cluster to send USER connects and
disconnects. |
| SET/NAME |
Set your name (SET/NAME <First
Name>) |
| SET/NOANN |
Turn off announcements. |
| SET/NOBEACON |
Turn off beacon spots. These are spots
ending in "/B" or "BCN" |
| SET/NOBEEP |
Turn off a beep for DX and Announcement
spots . |
| SET/NOBOB |
Turn off bottom of band DX spots. |
| SET/NOCQ |
Turn off CQ Zone in spot
announcements. |
| SET/NODX |
Turn off DX spot announcements. |
| SET/NODXCQ |
Turn off CQ Zone in DX info for DX spots |
| SET/NODXITU |
Turn off ITU Zone in DX info for DX spots |
| SET/NODXS |
Turn off US state/province or country
in DX info
for DX spots |
| SET/NOUSSTATE |
Turn
off US state or Canadian province spotter in DX info for DX
spots |
| SET/NOGRID |
Turn off DX Grids in spot
announcements |
| SET/NOITU |
Turn off ITU Zone in spot
announcements |
| SET/NOLOGIN |
Stops cluster from sending USER connects and
disconnects |
| SET/NOOWN |
Turn off skimmer spots for your own call |
| SET/NOSELF |
Turn off self spots by other
users |
| SET/NOSKIMMER |
Turn off Skimmer spots |
| SET/NOTALK |
Turn off the display of talk
messages |
| SET/NOWCY |
Turn off the display of WCY spots |
| SET/NOWWV |
Turn off the display of WWV spots |
| SET/NOWX |
Turn off the display of weather
announcements |
| SET/OWN |
Turn on Skimmer spots for own call |
| SET/NOLOGIN |
Stops cluster from sending USER connects and
disconnects |
| SET/QRA |
Input your Grid Square. (SET/QRA
EN72) |
| SET/QTH |
Set your city and state. (SET/QTH <City,
State>) DX <City, Country> |
| SET/RES 1 |
Tells CC-Cluster to give you 1 decimal point
rounding in DX spots |
| SET/RES 2 |
Tells CC-Cluster to give you 2 decimal point
rounding in DX spots |
| SET/SELF |
Turn on self spots by other users |
| SET/SKIMMER |
Turn on Skimmer spots |
| SET/TALK |
Turn on the display of talk
messages |
| SET/USSTATE |
Turns on US State, toggles CQ Zone, DX Grid, &
ITU Zone to off |
| SET/WCY |
Turn on the display of WCY spots |
| SET/WIDTH |
Sets the line width for DX spots, normally this
has been 80 characters. Depending on your logging
program you can use anything between 45 to 130
characters, SET/WIDTH XX where XX is the number of
characters. |
| SET/WWV |
Turn on the display of WWV spots |
| SET/WX |
Turn on the display of weather
announcements |
| SHow/CL |
Node Info and CCC Uptime See
SH/VERSION |
| SHow/CONF |
Shows nodes and callsigns of USERs, only nodes
called LOCAL by Sysop. |
| SHow/DX |
Shows last 30 spots |
| SHow/DX <Call> |
Shows last 30 spots for that call |
| SHow/DX/<number> |
Shows that number of spots.
SH/DX/100 |
| SHow/DX <Band> |
Shows spots on that band. SH/DX 20 for
20 meters |
| SHow/DX/ <Freq> |
Shows
spots by frequency range. Syntax = SH/DX
7020-7130 |
| SHow/DX <prefix*> |
Shows all spots for a country, standard prefix not
necessary, asterisk needed |
| SHow/DX 'rtty' |
Shows spots where the comment field contains
(rtty) |
| SHow/DXBY <call> |
Shows spots where spotter = Call |
| SHow/FDX |
Shows real time formatted dx
spots. |
| SHow/FILTER |
Shows how you have your filters
set. |
| SHow/HEAD <Call> |
Shows heading - distance and bearing for the
call. |
| SHow/MYANN |
Shows last 5 announcements allowed by your filter
settings. |
| SHow/MYDX |
Shows last 30 spots allowed by your filter
settings |
| SHow/MYDX <Call> |
Shows last 30 spots for the call allowed by your
filter settings. |
| SHow/MYDX/<number> |
Shows that number of spots allowed by your
filter. SH/MYDX/100 |
| SHow/MYDX <Band> |
Shows spots on that band allowed by your filter
settings. SH/MYDX 20 for 20
meters |
| SHow/MYFDX |
Shows last 30 spots allowed by your filter
settings. |
| SHow/MYWX |
Shows last 5 weather announcements
allowed by your filter settings. |
| SHow/RES |
Shows the number of digits after the decimal point for
frequencies |
| SHow/SETTINGS |
Shows information on the node for your call and
how you are setup. |
| SHow/STATION |
Shows information on the node for a station.
(SH/STA <Callsign>) |
| SHow/SUN |
Shows local sunrise and sunset times.
(SH/SUN <Prefix.) for that country |
| SHow/TIME |
Shows GMT time. |
| SHow/TIME <Call> |
Shows local time for the call. |
| SHow/USDB |
Shows State/Province for US/VE calls.
(SH/USDB <Callsign>) |
| SHow/USERS |
Shows callsigns of everyone connected to the local
node. |
| SHow/VERSION |
Shows the CCC and Winsock Versions and
Winsock Uptime for connections. |
| SHow/WIDTH |
Shows the length of a DX Spot. Normally 80
characters. |
| SHow/WWV |
Shows WWV info, (SH/WWV) gives last 5 (SH/WWV/99)
gives last 99 |
| SHow/WCY |
Shows last 5 DK0WCY, similar to
WWV |
| Talk |
Send a talk message to someone on the node.
(T <Callsign> <Message>) |
| UNSET/ |
This command can be used instead of SET/NO,
Compatibility for DX-Spider USERs |
| WHO |
This command will return a list of connections in
alphabetical order. Items are: Call User/Node Name
IP/AGW |
| WX |
The
command "WX" will send a local weather announcement.
(WX Sunny and Warm) |